Featured

  • Many players consider the best Martin D-28’s from the 70’s great guitars– and the best value around if you want a vintage D-28 on a budget. The best ones deliver great tone– a darker, richer voice than 50's or 60’s D-28’s. The non-adjustable truss rod, and great Indian rosewood Martin used in those years, and the nice bear claw sitka on top on this example, all make for a lovely instrument. A few nicks and dings, but in remarkable original condition. This instrument delivers. It’s all original, and it’s 100% crack-free (not even the common “pickguard crack”). The original pickguard is not lifting as you often see on these Martins. Original bridge that's never been off the guitar, pins, everything. It has the typical slight finish crazing on top, visible from an angle– it’s common on this vintage. The neck has never been set. Frets in fine shape. Original Grovers. With a low-ish saddle, it plays fine. And in tune everywhere. At some point in the future the new owner may want to do a neck set, but we prefer to keep it all original (and the action is fine as is). ... no longer available – see the newly listed 1970 Martin D-28 in the Featured Instruments section.
  • Out of stock
    Guitars from the world-renown luthier Lester Devoe are highly sought after – to the extent of a formidable wait list for a new one. And vintage Devoe guitars – especially ones from this era – are hard to come by. So this guitar is a gem. And with close to 30 years of aged wood/tone, its sound is amazing. We’ve had several Devoe's over the years, but none like this one. The age, the fact that it’s a cedar top, its light build, and Lester’s magical touch combine to give this vintage Devoe a tone that is in a class by itself, with both the bold flamenco presence you’d expect, and nuances of color and timbre that many great/expensive classical guitars lack. Like a great classical guitar it responds to the lightest touch, and with deep round rosewood color, yet it’s a lightning storm for flamenco. You can hear/see this guitar in the sound/video clip posted here. https://www.youtube.com/watch?v=4m-M9yI6u9g   1995 Lester Devoe "Flamenco Negra", the term for a Flamenco guitar that has rosewood back and sides. See photo of label.
    • Cedar top, and Indian Rosewood back and sides
    • Rosewood bridge
    • Ebony fretboard
    • 650mm scale length
    • Sloan tuners
    • Clear tap plate treble side
    • All original nitrocellulose finish
    • Rosette with “roses” design in the classic Andalusia tradition
    • Great condition:
    No cracks at all, anywhere. Several nicks and dings as expected from a guitar of this vintage. Work done on guitar: It has a new ebony fretboard (December ’22) custom designed for this guitar. Like many guitars with decades of age – especially the great ones that are lightly built – there was some bow in the neck, not much but enough that it was not perfect action/relief – and we are perfectionists. So we decided to really make this guitar perfect for playability and tone: we replaced the fretboard (and all frets of course), and so doing it now has perfect relief, perfect action, and astounding sound. Action: Low E string at 12th fret: 2.5mm; High E string at 12th fret: 2.4mm. It's a guitar that plays better, and sounds better now than it ever has. Price: No longer available In a modern hard shell case.
  • Read the full description below. If you're interested in this guitar, please call 512.922.8596 or contact us here.
  • This 10 string harp guitar has no markings no it, i.e. no maker's label, stamp, signature etc. Probably American, likely a one-of-a-kind made by someone we'll never know – but it’s very similar to the 1860 "Renaissance" Martin harp guitar that’s well documented. See/hear the video of this guitar being played: https://www.youtube.com/watch?v=ddxma5gCI7Q 10 string Harp guitar: • Width at lower bout: 12 1/4 inches • It’s deep: 4 ¼ inches at bottom/end pin, 3 /12 deep at neck joint. • Scale length: 24 1/2 inches • Nut width of six-string portion: 1 7/8 inches; string spacing of six strings on the regular guitar portion: 1 ½ inches • Ladder braced – no cracks, bellying, etc, on the original top • Solid Adirondack top, with original finish • Back, and sides: Brazilian rosewood and spruce laminate (similar to some Ashborns, and some Martins from that era). There has been some restoration to the sides, where a few pieces of Brazilian were missing/chipped, as well as to the back (in other words: sections of the outer brazilian layer have been replaced. • Ebony bridge, original. It has been off, and back on • The tuners are modern banjo tuners • Ice cream cone heel, and the neck's been "ebonized". While the neck, fretboard, and head have been restored (recently), the original design is intact. • Neck is Maple – "ebonized" but it's a solid maple neck Price: $6950.
  • This full-size violin, is a wonderful example of New England whaler culture of the 19th century. The violin itself is probably German made, early 1800’s, with maple back and sides. But the whale inlays (bone) on the fingerboard were no doubt done locally in New England. And the custom, hand made wood case, original to the instrument, also features a brass whale on the top. (Note, the brass handle on the case, is the exact kind used by CF Martin on their coffin cases for guitars in the mid-19th century.) The bridge, and tailpiece are modern. Bone inlays on the tuning pegs also. The instrument is fully set up and ready to play. Price: $2150. In its original wood case, with a brass whale inlay on top.
  • 52 Broadcaster. Impeccable attention to detail. Great sound, and feel. No, it never left the Fullerton factory as you see it here. This is one of the best tribute builds you'll find, at any price, done by real players. You can spend $6K plus, on a recent Fender Custom Shop version, but it won't look this good and it won't play like this. The best nitro cellulose finish, with light relic, and crazing. MJT body. Warmoth Fender licensed birds eye maple neck, chunky C-shape. Duncan Antiquity pickups. The bridge– with the numbers you see– is not available on a "Custom Shop" or reissue. It was custom made and on the instrument when we acquired it. Price: $3750. Ships in a well-worn modern tele case.
  • Out of stock
    This could be the best blackguard telecaster tribute ever. An homage to the great early 50’s telecaster. But it only gets accolades if it’s a great player. This one is a great player–its light weight (same weight range as on original early 50s telecaster), pickups, setup, and attention to detail make for a great sounding tele. A joy to play. There appear to be a few original 1952/1953 parts on this guitar– but this guitar is being offered strictly as a reproduction/tribute. And it’s a tribute, in its way, to the art of the (great) copy– and on that note, it comes with Nacho Baños’ great book, The Blackguard book (out of print and a $300-400 value in itself), with matching serial number on the cover of the book. (Click here for a story on Baños.) So the purchaser can follow along the narrative of some of the great original early Blackguards in the book–and how to identify original early 50’s Telecaster, Nocaster, and Esquire elements and parts– while having fun with this intriguing tribute guitar. • The bridge, a good reproduction of unknown origin. The photos tell the story. (Original early 50’s brass saddles?). Reproduction tuners. • The pickguard looks convincing, but we're calling it a reproduction. • Seymour Duncan Antiquity pickups. • The pots, and the pickup switch, appear to be original 1952 or 1953 Fender parts (but not with original solder joints etc). • The control plate appears to be an original 1952/1953 Fender plate. Tone, volume knobs are (good) reproductions. • Neck is from Mark Jenny, stamped on heel as official Fender “Licensed” neck. Medium C profile. Great feel– not baseball bat, and not too thin. • Weight, with strings: 6.625 lbs. This is in the same weight range as original early 50s telecasters. Compare to the weight of mediocre telecaster “reissues” on the market today, all of which weigh much more. • The body is by Mark Jenny. We waited patiently for over a year until the right Jenny body became available, to complete this instrument in the best way possible and to remove from the market the (nice light weight) reproduction body that was in place when we acquired the guitar that had a non-authentic 1952 date and signature in the neck pocket. The right thing to do– and the Mark Jenny body in place now has crazing and other elements characteristic to the early blackguard look, weight, wear, and feel. • Set up perfectly, and ready to play. Sold as a reproduction/tribute guitar only, together with the Nacho Baños The Blackguard book (book in as-new condition in original box) that will school the new owner on how to evaluate the fine, fully pedigreed, great Blackguards of the early 50’s. Price: $5950.
  • 63 Surf Green Strat tribute. Impeccable attention to detail. And more importantly, the right sound, and feel. It never left the Fullerton factory as you see it here – it’s a great tribute build that not only looks right, it plays like a dream. Loud and resonant, even when not plugged in. You can spend $6K plus, on a recent Fender Custom Shop versions, but it won't look this good and it won't play like this. Thin nitro cellulose finish, with light relic. Klein pickups, the choice of players who need the best authentic sound. Includes many Fender licensed parts, that makes it legit on the market. Strat is '63 spec, and note it has a chunky neck. Surf Green is as it should be, with the just a tiny touch of yellowy tint in places on guitar top, as what happens to a true vintage Surf Green finish after years of fading. Price: $3650. Ships in a well-used modern strat case.
  • Alessi, Hauser style machine head tuners. More rare, deep silver plating. Hand made in Italy. Engraved with high detail. These are new, old stock. Made circa 2009, they have never been used or mounted on a guitar, and they come with the original mounting screws, and in their original wood presentation case. Synthetic ivory kidney shaped buttons (rare style). 35mm on center. Perfect, unused condition. Price: $895.
  • This is a superb sounding 5 string banjo. Original nickel plating. • Bacon & Day Super, 5-string Banjo (Style A) Serial number: 25892 (early 1928) • Resonator, stamped on inside (in nickel-laminated maple): Bacon Banjo Co., Inc. Groton, CT. U.S.A. Dec. 20th, 1927 • Conversion, 5 string neck (original neck was probably a tenor or plectrum); Presumably, this neck is newer than the banjo– yet the advanced MOP fret markers are as found on the earliest versions of B&D Super banjos. We assume this neck was built by one of the best U.S. “conversion” builders – with a re-use of the original MOP inlay at the peghead plus the dowel stick. Maple neck, with steel reinforcing rod. Fretboard is beautiful jet-black ebony; multi-layer neck bindings. Fretboard is a very comfortable 1 3/8 inches wide at the nut, 1 7/8 wide where fretboard meets body. • Nickel plated • 22 frets • Scale length: 27 inches • Extended Maple resonator– nickel laminated on inside • Original flat Tulip-hole flange (not the “add-on” round-hole resonator of earlier years). • Original, top of the line Type III Silver Bell tone ring (No Hole tone ring) original to the instrument (this is the most sought-after, advanced Silver Bell tone ring, introduced early 1927). • Original 2 band Grover geared tuning pegs • Fults tailpiece, and included a variety of Fults tone pins. Bob Fults made the best tailpieces available. And his tone pins let you tweak the tone of your banjo. There are several interchangeable Fults pins included here– ivory, ebony, lead, sterling silver, brass, and copper. Plus a “tone lock”. (Bob Fults recently retired, and these highly sought after Fults tailpieces and pins are no longer available.) In its original hard shell Lifton case. $3750.
  • Full size, Charles Fetique violin (French, early 20th century – circa 1930), with original label inside. This is a rich, sonorous instrument. A deep, round tone, that – like all good violins – does not make you work overly hard to attain. It has a darker, lush, round tone that professional players love – and great projection. We recently A-B'd this instrument against $5k+ violins in the area, and there was no comparison, this instrument was louder, more full, more round and full in the bass notes, and all around a stellar performer. This violin would be a great student violin upgrade – for that aspiring violinist who is ready to graduate to, and enjoy, a better instrument than what's typically available in the $4-5K range, at a very attractive price. And, the buyer will have the confidence of both a Letter of Expertise, and a professional appraisal: • Certificate: Jean-Jacques Rampal, Paris, 2014. (This is the letter of expertise, on this violin, from one of the top experts on French Violins, in Paris, France). And: • Written, professional appraisal of the violin, done from personal inspection, from one of the top violin shops/experts in Texas (Jay R. Rury Violins, Dallas), with a valuation of $3,500.00 Both the above documents will be included with the sale. The violin is in excellent condition. There are no sound post, or bass bar cracks. It was professionally set up to play, by Blackerby Violin in Austin. In a modern Tonerelli case. Price: $3250.
  • Circa 1912 Mother of Pearl Inlaid Guitar The guitar is extensively inlayed with mother of pearl . The guitar was restored in 2001, work that included converting the instrument to X-bracing, reproduction ebony bridge, reproduction small maple bridge plate. It’s signed inside by the restorer, “B. Lehmann 2001” (Bernie Lehmann, well known luthier in New York.) The guitar has no stamps or labels, but it was probably made by George Bauer – because of many stylistic similarities. The guitar is set up and ready to play. As many guitars of this era, the tone is tilted toward very bright, glassy, brazilian rosewood trebles, not fuller bass. Solid Spruce top Solid Brazilian Rosewood back and sides MOP inlays, fretboard, rosette, and bindings X-braced Original tuners Width at lower bout: 13 1/2 inches Scale Length: 24 7/8 inches Nut Width: 1 ¾ inches V shaped neck .... no longer available....